Standard Features
- Available in 18”, 24”, 36”, 48”, 60” and 72” widths
- 30,000 BTU (NAT or LP) burner per 12” Thermostatic Models
- 20,000 BTU (NAT or LP) burner per 12” Manual Models
- Electronic spark ignition (battery)
- Stainless steel front, vent and sides are standard, rear and bottom panels are aluminized steel.
- Reinforced, insulated double wall sides
- 1” thick polished rolled steel plate
- 5” high rear and 4” side splash guards
- 3/4” rear gas connection and pressure regulator
- Protected flue opening
- Exclusive “NO COLD” Zone -Uniform heat distribution across surface
- Each burner equipped with runner tube
- Grease drawers with large capacity
- Fully welded griddle plate with protected exhaust vent
Specifications
| Manufacturer | Southbend |
| Model Number | HDG-60-M |
| Griddle plate thickness | 1" |
| Cooking Surface Depth (front - back) | 24" |
| Width (side - side) | 60" |
| Controls | Manual |
| Griddle plate finish | Smooth Steel |
| Exterior finish | Stainless Steel Front & Sides |
| BTU/hr (Natural/Propane) | 100K |
Documents
- Width:
- 60 - 72 inches
- BTU:
- 50K - 100K
- Power Type:
- Gas
- Griddle Location:
- Full Surface
- Griddle Size:
- 60 inches
- Control Type:
- Manual
- Installation Type:
- Countertop
