Everest Refrigeration reach-in refrigerator.
Cabinet Construction- Heavy duty stainless steel interior / exterior with rounded corners for a hazard-free workspace.
- Galvanized steel top, bottom and rear.
- 5" thick high density polyurethane insulation.
- Four 5" swivel casters with locks on front set. Leg stabilizers standard for model ESR1D2.
- Top mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing.
- Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
- Full-length air duct system and airflow guard ensure optimal circulation of cold air.
- Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
- Large capacity, corrosion-resistant condenser and evaporator coils.
- Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
- High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
- Pressure relief devices allow smooth access to cabinet interior when re-opening doors.
- Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
- Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
- Heavy duty stainless steel interior / exterior.
- 5" thick high density polyurethane insulation.
- Frame heaters prevent exterior moisture build up.
- Self-closing with adjustable torsion system for a positive seal.
- Thick gauge, stainless steel drawer frames with low-friction ball bearings.
- Snap-in magnetic door and drawer gaskets make cleaning and replacement an easy process.
- High strength, recessed door handles.
- Pre-installed door locks keep your items safe from theft (does not apply to drawers).
- Epoxy coated, steel wire shelves (see table for quantity).
- Height adjustable stainless steel clips.
- Multi-function digital controller with easy to read LED display.
- Factory preset temperature, 35°F for refrigerators and -4°F for freezers. Temperature setting range from 33°F to 54°F for refrigerators and -10°F to 54°F for freezers.
- Audible overheat protection alarm for compressor and condenser coil.
Everest ESR1D2 Specifications
| Temperature | Refrigerator |
| Door Count | 1 (H), 2 (DR) |
| Door Style | Swing Solid + Drawer |
| Shelves | 2 |
| Cu. Ft. Capacity | 23 |
| Exterior Length (in.) | 29 1/4 |
| Exterior Depth (in.) | 31 5/8 |
| Exterior Height (in.) | 74 1/4 |
| Power (V-Hz-Ph) | 115-60-1 |
| Amps | 3.7 |
| Compressor HP | 1/4+ |
| Crated Weight (lbs.) | 340 |
Documents
3 Year Parts and Labor Warranty / 5 Year Compressor Warranty
- Door Type:
- Solid
- Door Style:
- Swing
- Number of Doors:
- 3
- Number of Shelves:
- 2
- Electrical:
- 115/60/1
- Capacity:
- 12 - 24 cu. ft.
- Width:
- 24 - 36 inches
- Compressor Location:
- Top Mounted
