Everest Refrigeration club top direct draw keg refrigerator.
Cabinet Construction- Heavy duty stainless steel countertop with textured laminate, black vinyl exterior.
- Galvanized steel interior walls and high quality stainless steel floor.
- 1 3/4" thick high density polyurethane insulation.
- Compact, easy-access club top compartment.
- Built-in caster thread receptacles for all models.
- Side mounted R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP).
- Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
- Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
- Large capacity, corrosion-resistant condenser and evaporator coils.
- Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
- High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
- Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
- Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
- Textured laminate, black vinyl exterior and galvanized steel interior with 1 ¾” thick high density polyurethane insulation for doors. Heavy duty stainless steel exterior and galvanized steel interior with ¾” thick high density polyurethane insulation for cub top lids.
- Snap-in magnetic door gasket make cleaning and replacement an easy process.
- High strength door handles are recessed for doors and raised for club top lids.
- Pre-installed door locks keep your items safe from theft.
- NSF certified, 3” diameter insulated stainless steel draft arm with matching air distributor. Two single faucet draft arms for model EBD2-CT. One single faucet and one dual faucet draft arms for model EBD3-CT. Two dual faucet draft arms for model EBD4-CT.
- One epoxy coated, steel wire shelf.
- Height adjustable stainless steel clips.
- Multi-function digital controller with easy to read LED display.
- Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
- Audible overheat protection alarm for compressor and condenser coil.
Everest EBD4-CT Specifications
| Temperature | Refrigerator |
| Door Count | 3 |
| Door Style | Swing Solid |
| Shelves | 1 |
| Cu. Ft. Capacity | 32 |
| Exterior Length (in.) | 89 1/4 |
| Exterior Depth (in.) | 27 |
| Exterior Height (in.) | 37 1/4 |
| Power (V-Hz-Ph) | 115-60-1 |
| Amps | 2.5 |
| Compressor HP | 1/3 |
| Crated Weight (lbs.) | 415 |
| Barrels | 4 |
Documents
3 Year Parts and Labor Warranty / 5 Year Compressor Warranty
- Door Type:
- Solid
- Door Style:
- Swing
- Number of Doors:
- 3
- Number of Shelves:
- 1
- Electrical:
- 115/60/1
- Capacity:
- 24 - 36 cu. ft.
- Width:
- 84 - 96 inches
- Compressor Location:
- Side Mounted
- Style:
- 1/2 Barrel
- Type:
- Club Top Beer Dispensers
- Number of Kegs:
- 4
- Number of Taps:
- 4
- Exterior Finish:
- Black
