Everest Refrigeration direct draw keg refrigerator.
Cabinet Construction- Heavy duty stainless steel countertop and rail with textured laminate, black vinyl exterior (rail applies only to model EBD1).
- Galvanized steel interior walls and high quality stainless steel floor.
- 1 3/4" thick high density polyurethane insulation.
- Four pre-installed 5" swivel casters with locks on front set (applies only to model EBD1).
- Built-in caster thread receptacles for all models.
- Side mounted, self-contained and fully detachable Blizzard R290 condensing unit uses environmentally friendly, EPA-compliant R290 refrigerant with zero (0) Ozone Depletion Potential (ODP) and three (3) Global Warming Potential (GWP). Blizzard R290 is easily replaceable and requires no on-site brazing (Blizzard R290 condensing unit is back mounted for model EBD1).
- Electronically commutated (ECM) fan motors achieve rapid cooling with less energy consumption.
- Full-length air duct system ensures optimal circulation of cold air.
- Time-initiated and temperature-terminated auto defrost cycle for seamless operation.
- Large capacity, corrosion-resistant condenser and evaporator coils.
- Self-maintaining, energy-efficient condensate drain pan requires no external drains or electric heaters.
- High performance, auto-reverse condenser fan motor supports compressor ventilation and condenser coil cleaning. Refer to owner’s manual for full maintenance instructions.
- Pre-wired and ready to plug, 115V/60Hz/1Ph, NEMA 5-15P.
- Energy efficient silicone coated and shatter-proof LED lighting provides bright, high color illumination with low heat output.
- Textured laminate, black vinyl exterior with galvanized steel interior.
- 1 3/4" thick high density polyurethane insulation.
- Snap-in magnetic door gasket make cleaning and replacement an easy process.
- High strength, recessed door handles.
- Pre-installed door locks keep your items safe from theft.
- NSF certified, 3” diameter insulated stainless steel draft arm with matching air distributor. One single faucet draft arm for model EBD1. Two single faucet draft arms for model EBD2. One single faucet and one dual faucet draft arms for model EBD3. Two dual faucet draft arms for model EBD4.
- Multi-function digital controller with easy to read LED display.
- Factory preset temperature, 35°F. Temperature setting range from 33°F to 54°F.
- Audible overheat protection alarm for compressor and condenser coil.
Everest EBD4 Specifications
| Temperature | Refrigerator |
| Door Count | 3 |
| Door Style | Swing Solid |
| Cu. Ft. Capacity | 32 |
| Exterior Length (in.) | 89 1/4 |
| Exterior Depth (in.) | 27 |
| Exterior Height (in.) | 37 1/4 |
| Power (V-Hz-Ph) | 115-60-1 |
| Amps | 2.5 |
| Compressor HP | 1/3 |
| Crated Weight (lbs.) | 405 |
| Barrels | 4 |
Documents
3 Year Parts and Labor Warranty / 5 Year Compressor Warranty
- Door Type:
- Solid
- Door Style:
- Swing
- Number of Doors:
- 3
- Electrical:
- 115/60/1
- Capacity:
- 24 - 36 cu. ft.
- Width:
- 84 - 96 inches
- Compressor Location:
- Side Mounted
- Style:
- 1/2 Barrel
- Type:
- Beer Dispensers
- Number of Kegs:
- 4
- Number of Taps:
- 4
- Exterior Finish:
- Black
